110000 BattenMates™ Hex Head
Designed for fixing metal battens to timber or steel trusses these screws are also ideal for fixing in thin sheet metal applications where high strip torque and holding power are required. The Hex Washer head provides a heavy duty, stable driving fixing with a wide surface clamping area. If not already stocked painted to match all popular prepainted metal roofing, cladding & fencing profile colours they can be painted upon request. Matt and Metallic colours also available upon request.
• Instant piercing
• Fast drilling and easy to use
• Won't skid, wander or slip
• Minimal drilling swarf
• High Shear Strength
• High Withdrawal strength
• High Tensile Strength
• High Strip Torque
• High corrosion resistant coatings
• Complies with AS3566.1 & 2
• Fast drilling and easy to use
• Won't skid, wander or slip
• Minimal drilling swarf
• High Shear Strength
• High Withdrawal strength
• High Tensile Strength
• High Strip Torque
• High corrosion resistant coatings
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
• Fixing metal roof battens to timber or steel trusses
• Fixing capping's, flashings to plinth boards, railings etc., in colorbond fencing applications
• Fixing capping's, flashings to plinth boards, railings etc., in colorbond fencing applications
| Size | Coating | Pack Type | 500 Y Drilling Capacity in Steel | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|
| 12g-11 x 40mm |
|
|||||
| 13g-13 x 30mm |
|
|||||
| 13g-13 x 40mm |
|
|||||
| 15g-12 x 42mm |
|
