403120 Torx Tamper Proof Single End Drive Bits
Torx Tamper Proof Drive bits are available in a range of sizes. They feature a pin inside the recess making it impossible to unfasten without the correct Torx Tamper Proof Drive bit. These 25mm length Insert bits are recommended to be used with Magnetic Bit Holders.
• Tamper resistant for increased security
• Torx Drive bits provides easier insertion and reduces cam out of the screw recess
• Available in a range of lengths makes installing in difficult to access areas easier
• Made from High Quality steel for longer life
• Torx Drive bits provides easier insertion and reduces cam out of the screw recess
• Available in a range of lengths makes installing in difficult to access areas easier
• Made from High Quality steel for longer life
1/ Select the correct type and size driver tip to suit the fastener to be driven and fit it to your power drill or screw driver or hand tool. If power driving ensure the correct speed is set on the tool.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Note:-
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Note:-
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
Note:-
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
| Size | Pack Type | 490 Y Description/Features | Code |
|---|---|---|---|
| T10 x 25mm |
|
||
| T15 x 25mm |
|
||
| T20 x 25mm |
|
||
| T25 x 25mm |
|
||
| T27 x 25mm |
|
||
| T30 x 25mm |
|
||
| T40 x 25mm |
|
||
| T45 x 25mm |
|
||
| T50 x 25mm |
|