570110.1200 Black Mini Premium Pipe Flashings Non Retrofit
Mini Premium Pipe Flashings suit penetrations of 0 to 35mm on roof pitches between 0 to 45° and have a small footprint with a base of 100mm x 100mm Square. They have an aluminium base that can be formed to suit your roof profile and a unique rubber boot design that provides good contact with flashed pipe providing a watertight seal. Mini Premium Pipe Flashings are not designed for Retro Fitting applications.
• The Black and Grey versions are manufactured from a specially formulated EPDM rubber polymer and will withstand constant temperatures between – 50°C to 115°C.
• The Red version is Silicone product and will withstand constant temperatures between – 50°C to 200°C.
• All versions have excellent durability and UV characteristics.
• The Red version is Silicone product and will withstand constant temperatures between – 50°C to 200°C.
• All versions have excellent durability and UV characteristics.
For applications where the Flashing can be slid down over the top of the pipe.
1.Trim rubber boot to suit pipe size, ensure surface is clean and dry before application.
2. Slide down pipe using water as a lubricant, if needed
3. Press the flashing base firmly to conform to the shape of the roof profile, smooth out any creases.
4. Using a pencil or marker, mark a line on the roof around the perimeter of the base of the flashing. Ensure the pencil or marker is compatible with the roof profile material.
5. Lift the flashing up the pipe far enough to allow for application of the sealant.
6. Apply the sealant to the roof profile just inside the marked perimeter line.
7 Slide the flashing to down the pipe to its previous conformed position.
8 Apply pressure to create a seal then fasten using self-drilling screws with EPDM Seals fitted.
Ensure the first screws used are at either side of a crest of the profile starting at the direction from which the water will flow and work your way around from there. Screws should be a maximum of 30~35mm apart.
Mini Premium Pipe Flashings are not suitable for applications where the Flashing cannot be slid down over the top of the pipe. (Retro fitting)
1.Trim rubber boot to suit pipe size, ensure surface is clean and dry before application.
2. Slide down pipe using water as a lubricant, if needed
3. Press the flashing base firmly to conform to the shape of the roof profile, smooth out any creases.
4. Using a pencil or marker, mark a line on the roof around the perimeter of the base of the flashing. Ensure the pencil or marker is compatible with the roof profile material.
5. Lift the flashing up the pipe far enough to allow for application of the sealant.
6. Apply the sealant to the roof profile just inside the marked perimeter line.
7 Slide the flashing to down the pipe to its previous conformed position.
8 Apply pressure to create a seal then fasten using self-drilling screws with EPDM Seals fitted.
Ensure the first screws used are at either side of a crest of the profile starting at the direction from which the water will flow and work your way around from there. Screws should be a maximum of 30~35mm apart.
Mini Premium Pipe Flashings are not suitable for applications where the Flashing cannot be slid down over the top of the pipe. (Retro fitting)
| Size | Pack Type | Colour | 480 Y Material | 490 Y Description/Features | 610 Y Base Size | Code |
|---|---|---|---|---|---|---|
| No. 0 |
|