403010 Spring Grip, Non Magnetic Nutsetters
These Nutsetters feature a spring grip mechanism which holds the screw in the nutsetter whilst it is being positioned onto the materials to be fastened. This feature is designed for use with non magnetic Stainless Steel Screws. Can be used with steel screws as being non magnetic they are not subject to the build up of drilling swarf inside the hex drive as happens with Magnetic Nutsetters. These nutsetters are available in a selected sizes to suit 10g, 12g and 14g roofing and cladding screws.
• Provides a firm grip on non magnetic screws such as those made from Stainless steel etc., making installation much quicker and easier
• Does not build up drilling swarf as there is no magnet, this reduces wobbling, improves driving efficiency and eliminates downtime cleaning swarf as is the case with a magnetic nutsetter
• Made from High Quality steel for longer life
• Does not build up drilling swarf as there is no magnet, this reduces wobbling, improves driving efficiency and eliminates downtime cleaning swarf as is the case with a magnetic nutsetter
• Made from High Quality steel for longer life
1/ Select the correct size nutsetter to suit the fastener to be driven and fit it to your power drill or screw driver or hand tool. If power driving ensure the correct speed is set on the tool.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Note:-
Always check the nutsetter size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Note:-
Always check the nutsetter size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
• For 10g & 12g screws use a 5/16” Hex Nutsetter
• For 14g screws use a 3/8” Hex Nutsetter
Note:-
14g ShedMates™ and 14g Storm-Mates™ Skylight screws use a 5/16” Hex Nutsetter.
This is designed for convenience so that they can be driven
• For 14g screws use a 3/8” Hex Nutsetter
Note:-
14g ShedMates™ and 14g Storm-Mates™ Skylight screws use a 5/16” Hex Nutsetter.
This is designed for convenience so that they can be driven
| Size | Pack Type | 490 Y Description/Features | Code |
|---|---|---|---|
| 5/16" x 65mm |
|
||
| 3/8" x 65mm |
|