403080 Phillips Double End Drive Bits
These Double end bits are designed to be fitted directly into the end of a electric or battery operated screwdriver, impact driver or a drill chuck and feature a driver tool at each end of the drive bit. They are available in a range of lengths.
• The double end reduces the frustration when your one and only driver tip wears or snaps without warning
• Available in a range of lengths makes installing in difficult to access areas easier
• Made from High Quality steel for longer life
• Available in a range of lengths makes installing in difficult to access areas easier
• Made from High Quality steel for longer life
1/ Select the correct type and size driver tip to suit the fastener to be driven and fit it to your power drill or screw driver or hand tool. If power driving ensure the correct speed is set on the tool.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Note:-
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Note:-
Always check the driver bit size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
Generally these #2 size drive bits will suit from 5g up to 10g screws.
Note:-
Some exceptions exist to the gauge/drive bit sizes stated above where screws have been designed for specific applications or industries. Always check the driver bit size which
Note:-
Some exceptions exist to the gauge/drive bit sizes stated above where screws have been designed for specific applications or industries. Always check the driver bit size which
| Size | Pack Type | 490 Y Description/Features | Code |
|---|---|---|---|
| No. 2 x 45mm |
|
||
| No. 2 x 65mm |
|
||
| No. 2 x 75mm |
|
||
| No. 2 x 100mm |
|
||
| No. 2 x 150mm |
|