250510 MultiMates® - Strip Collated - Countersunk Rib Needle Point, Twinfast Thread
These screws feature a sharp Needle point for fast drilling into timber or thin metal up to 0.75mm thick, a Twinfast thread for rapid installation and self countersinking ribs to ensure a flush or below the surface finish in the material being attached. Collated into plastic strips of 50 for use with collated power tools for high volume use, these screws offer time and labour saving benefits to the tradesman. Fits all popular brands of collated screwdrivers including Makita, De Walt etc.,
• Fast drilling and easy to use
• Instant piercing
• Won't skid, wander or slip
• Minimal drilling swarf
• Ribbed Countersunk head self countersinks into fibre cement board or timber
• Available in a several lengths
• The Zinc Plated finish is recommended for internal use only but can be used externally if adequately painted or protected
• Complies with AS3566.1 & 2
• Instant piercing
• Won't skid, wander or slip
• Minimal drilling swarf
• Ribbed Countersunk head self countersinks into fibre cement board or timber
• Available in a several lengths
• The Zinc Plated finish is recommended for internal use only but can be used externally if adequately painted or protected
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your collated screw driver.
2/ Insert collated strip into screwdriver
3/ Ensure the screwdriver depth set gauge on the nosepiece is set to the correct setting for the length of screw being driven
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
5/ Check the driven depth of the screw is to your requirement, if not make the minor adjustments necessary using the depth control function on the collated driver tool.
Recommended Driving speed is approximately 2,000 r.p.m. or higher
2/ Insert collated strip into screwdriver
3/ Ensure the screwdriver depth set gauge on the nosepiece is set to the correct setting for the length of screw being driven
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
5/ Check the driven depth of the screw is to your requirement, if not make the minor adjustments necessary using the depth control function on the collated driver tool.
Recommended Driving speed is approximately 2,000 r.p.m. or higher
• Ideal for attaching fibre cement sheets, panels or boards to timber or thin metal up to 0.75mm thick
| Size | Coating | Pack Type | 490 Y Description/Features | 500 Y Drilling Capacity in Steel | 510 Y Rec. Embedment in Timber | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|---|---|
| 8g-15 x 20mm |
|
|||||||
| 8g-15 x 30mm |
|