250520 MultiMates® - Strip Collated - Bugle Head, Needle Point, Coarse Thread
Designed for fixing plasterboard to timber studs, the curved underside of the head eliminates tearing of the paper lining on the board during installation. Featuring a Coarse thread for strong hold in softer timbers and composite board applications. Collated into plastic strips of 50 for use with collated power tools for high volume use, these screws offer time and labour saving benefits to the tradesman. Fits all popular brands of collated screwdrivers including Makita, De Walt etc.,
• Instant piercing
• Fast drilling and easy to use
• Won't skid, wander or slip
• Available in a several lengths
• The Zinc Plated finish is recommended for internal use only but can be used externally if adequately painted or protected
• Complies with AS3566.1 & 2
• Fast drilling and easy to use
• Won't skid, wander or slip
• Available in a several lengths
• The Zinc Plated finish is recommended for internal use only but can be used externally if adequately painted or protected
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your collated screw driver.
2/ Insert collated strip into screwdriver
3/ Ensure the screwdriver depth set gauge on the nosepiece is set to the correct setting for the length of screw being driven
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
5/ Check the driven depth of the screw is to your requirement, if not make the minor adjustments necessary using the depth control function on the collated driver tool.
Recommended Driving speed is approximately 2,000 r.p.m. or higher
2/ Insert collated strip into screwdriver
3/ Ensure the screwdriver depth set gauge on the nosepiece is set to the correct setting for the length of screw being driven
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
5/ Check the driven depth of the screw is to your requirement, if not make the minor adjustments necessary using the depth control function on the collated driver tool.
Recommended Driving speed is approximately 2,000 r.p.m. or higher
• Collated in strips of 50 for high volume, rapid installation fixing of plasterboard sheeting to timber studs
| Size | Coating | Pack Type | 490 Y Description/Features | 500 Y Drilling Capacity in Steel | 510 Y Rec. Embedment in Timber | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|---|---|
| 6g-9 x 32mm |
|
|||||||
| 6g-9 x 40mm |
|