200200 MultiMates® - Bugle Head, Needle Point, Coarse Thread
These screws feature a Bugle head combined with a Coarse thread with the benefits of easy driving and a strong hold in softer timbers, composite board and thin metal applications. Featuring a sharp Needle point for fast drilling and a Coarse thread for rapid installation these screws are now extremely popular as a general purpose, economical fixing for a multitude of applications. Popular 6 gauge sizes are also available in Collated plastic strips, refer to Collated screws section.
• Instant piercing
• Fast drilling and easy to use
• Won't skid, wander or slip
• Available in a several lengths
• The Zinc Plated finish is recommended for internal use only but can be used externally if adequately painted or protected
• Complies with AS3566.1 & 2
• Fast drilling and easy to use
• Won't skid, wander or slip
• Available in a several lengths
• The Zinc Plated finish is recommended for internal use only but can be used externally if adequately painted or protected
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is 1,000 r.p.m for fixing into timber and 2,000+ r.p.m. for fixing into thin metal up to 0.75mm thick.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is 1,000 r.p.m for fixing into timber and 2,000+ r.p.m. for fixing into thin metal up to 0.75mm thick.
• Typical applications include timber furniture, wooden toys, curtain tracks, attaching metal fascia and gutter brackets and general fastening to timber and thin metal up to 0.75mm.
• The 10g sizes are specially designed for laminating multiple layers
• The 10g sizes are specially designed for laminating multiple layers
| Size | Coating | Pack Type | 500 Y Drilling Capacity in Steel | 510 Y Rec. Embedment in Timber | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|---|
| 7g-9 x 20mm |
|
||||||
| 7g-9 x 25mm |
|
||||||
| 7g-9 x 30mm |
|
||||||
| 7g-9 x 35mm |
|
||||||
| 8g-8 x 25mm |
|
||||||
| 8g-8 x 30mm |
|
||||||
| 8g-8 x 40mm |
|
||||||
| 8g-8 x 50mm |
|
||||||
| 8g-8 x 57mm |
|
||||||
| 8g-8 x 75mm |
|
||||||
| 10g-8 x 40mm |
|
||||||
| 10g-8 x 45mm |
|
||||||
| 10g-8 x 50mm |
|