403000 Magnetic Nutsetters
Magnetic Nutsetters feature a magnet inside the Hex Drive to hold the screw in the nutsetter whilst it is being positioned onto the materials to be fastened. These nutsetters are available in a range of sizes to suit from 6g to 18g and lengths from 42mm to 300mm.
• The magnet holds the screw firmly within the nutsetter making fastener installation much quicker and easier
• Made from High Quality steel for longer life
• Available in a wide range of lengths makes installing in difficult to access areas easier
• Made from High Quality steel for longer life
• Available in a wide range of lengths makes installing in difficult to access areas easier
1/ Select the correct size nutsetter to suit the fastener to be driven and fit it to your power drill or screw driver or hand tool. If power driving ensure the correct speed is set on the tool.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Always check the nutsetter size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Always check the nutsetter size which is shown against each individual IDEAL screw size/type on this website to ensure the correct size Drive Bit is selected for the fastener being driven.
• For 6g & 8g screws use a 1/4” Hex Nutsetter
• For 10g & 12g screws use a 5/16” Hex Nutsetter
• For 14g screws use a 3/8” Hex Nutsetter
Note:-
14g ShedMates™ and 14g Storm-Mates™ Skylight screws use a 5/16” Hex Nutsetter.
This is d
• For 10g & 12g screws use a 5/16” Hex Nutsetter
• For 14g screws use a 3/8” Hex Nutsetter
Note:-
14g ShedMates™ and 14g Storm-Mates™ Skylight screws use a 5/16” Hex Nutsetter.
This is d
| Size | Pack Type | 490 Y Description/Features | Code |
|---|---|---|---|
| 1/4" x 42mm |
|
||
| 1/4" x 65mm |
|
||
| 5/16" x 42mm |
|
||
| 5/16" x 65mm |
|
||
| 5/16" x 100mm |
|
||
| 5/16" x 150mm |
|
||
| 5/16" x 300mm |
|
||
| 3/8" x 42mm |
|
||
| 3/8" x 65mm |
|
||
| 3/8" x 150mm |
|
||
| 7/16" x 65mm |
|
||
| M12 x 65mm |
|