120320 SteelMates® - Trim Head
These screws feature a very small diameter head and are ideally suited for fixing timber skirtings, architraves etc. to steel frame houses. Incorporating a No. 1 Robertson Square drive provides the added benefit of reduced recess cam out and easy driving. The Trim head allows for a neat and tidy finish which is easy to stop and paint over.
• Small diameter head causes minimal disruption to fixture material
• Square drive for easy installation and minimizes cam outs of screw recess
• Fast drilling and easy to use
• Complies with AS3566.1 & 2
• Square drive for easy installation and minimizes cam outs of screw recess
• Fast drilling and easy to use
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
• Ideally suited for fixing timber skirtings, architraves etc. to steel frame houses.
• The Zinc Plated finish is recommended for internal use only but can be used externally if adequately painted or protected
• The Zinc Plated finish is recommended for internal use only but can be used externally if adequately painted or protected
| Size | Coating | Pack Type | 500 Y Drilling Capacity in Steel | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|
| 7g-19 x 50mm |
|