200500 StitchMates® - SupaLow™ Head, Needle Point, Twinfast Thread
These unique SupaLow™ head screws have an extremely Low profile head specifically designed for use in the steel frame housing industry. Featuring a point and shank design which provides a high strip torque in very thin steel materials. The unique head design ensures minimal disruption to subsequent claddings such as plasterboard etc., which may fixed over the top of the head of the screw.
• Very low profile head ensures minimal disruption to subsequent claddings
• Instant piercing
• Fast drilling and easy to use
• Won't skid, wander or slip
• Minimal drilling swarf
• High corrosion resistant coating designed for use externally
• Complies with AS3566.1 & 2
• Instant piercing
• Fast drilling and easy to use
• Won't skid, wander or slip
• Minimal drilling swarf
• High corrosion resistant coating designed for use externally
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is 1,000 r.p.m for fixing into timber and 2,000+ r.p.m. for fixing into thin metal up to 0.75mm thick.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is 1,000 r.p.m for fixing into timber and 2,000+ r.p.m. for fixing into thin metal up to 0.75mm thick.
• Ideal for use in steel frame housing and construction where a low profile head is required
• Can be used for heating and air conditioning applications
• Suitable for Sheetmetal applications
• Can be used for heating and air conditioning applications
• Suitable for Sheetmetal applications
| Size | Coating | Pack Type | 500 Y Drilling Capacity in Steel | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|
| 10g-15 x 16mm |
|