200450 StitchMates® - Hex Slotted, Needle Point, Twinfast Thread
These screws feature a sharp Needle point for fast drilling, a Twinfast thread for rapid installation when fixing to timber or thin metal up to 0.75mm thick. The Hex Slotted head enables them to be power driven but offers the benefit of being able to be removed and re-installed by hand using a bladed screwdriver. Can be painted upon request to match all popular prepainted metal roofing, cladding & fencing profile colours if required.
• Instant piercing
• Fast drilling and easy to use
• Won't skid, wander or slip
• Minimal drilling swarf
• High corrosion resistant coating designed for use externally
• Combination Hex Slotted driver type allows for power driving with the benefit of being able to be easily removed and re-fastened with a bladed screwdriver if required for maintenance access
• Complies with AS3566.1 & 2
• Fast drilling and easy to use
• Won't skid, wander or slip
• Minimal drilling swarf
• High corrosion resistant coating designed for use externally
• Combination Hex Slotted driver type allows for power driving with the benefit of being able to be easily removed and re-fastened with a bladed screwdriver if required for maintenance access
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is 1,000 r.p.m for fixing into timber and 2,000+ r.p.m. for fixing into thin metal up to 0.75mm thick.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is 1,000 r.p.m for fixing into timber and 2,000+ r.p.m. for fixing into thin metal up to 0.75mm thick.
• Ideal for use in sheet metal applications in including ductwork, air-conditioning, white goods applications etc., or in manufactured products where on site servicing is required.
• Commonly used for fixing gutter mesh to metal gutters to prevent clo
• Commonly used for fixing gutter mesh to metal gutters to prevent clo
| Size | Coating | Pack Type | 500 Y Drilling Capacity in Steel | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|
| 8g-15 x 12mm |
|
|||||
| 8g-15 x 16mm |
|