171110 410 Series Stainless Steel StitchMates® - Hex Seal Slotted Head
Stainless StitchMates™ feature a needle point allowing them to self drill through and/or lap stitch thin sheet metal up to 1.2mm thick i.e. 2 pieces of 0.6mm steel. The Hex Washer head provides a heavy duty, stable driving fixing with a wide surface clamping area. The slotted head allows easy removal for maintenance purposes. Made from hardened 410SS for self piercing through steel combined with good corrosion resistance. Assembled with an EPDM rubber washer for water proofing applications.
• Featuring a Hex Slotted head which provides the added benefit of being able to be power driven and then removed and re-installed by hand using a bladed screwdriver. This makes it an excellent choice for use where sheet metal panels or covers need to be removed for maintenance purposes
• Superior corrosion resistance to that of carbon steel screws
• Assembled with EPDM Seal for waterproof connections
• Instant piercing
• Fast drilling and easy to use
• Won't skid, wander or slip
• Minimal drilling swarf
• High Shear Strength
• High Withdrawal Strength
• High Tensile Strength
• High Strip Torque
• Complies with AS3566.1 & 2
• Superior corrosion resistance to that of carbon steel screws
• Assembled with EPDM Seal for waterproof connections
• Instant piercing
• Fast drilling and easy to use
• Won't skid, wander or slip
• Minimal drilling swarf
• High Shear Strength
• High Withdrawal Strength
• High Tensile Strength
• High Strip Torque
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ If necessary push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 800~1,000 r.p.m.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ If necessary push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 800~1,000 r.p.m.
• Ideal for use in Sheetmetal fabrications, water tanks and other applications where high a longer life fastener and waterproof connection is required
| Size | Pack Type | 480 Y Material | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|
| 8g-15 x 12mm |
|