170250 Stainless SteelMates® Super 500™ - Countersunk Rib Wing
Super 500™ Countersunk Rib Wing Stainless SteelMates® are revolutionary screws that can attach timber to steel up to 12.5mm thick in a single operation. These screws drill through timber, into and through steel and provide exceptional corrosion resistance combined with superior drilling speed in the same screw. Made from 302 Grade Stainless Steel with BiMetal drill point. For use in highly corrosive environments where a long life fastener is required.
• Stainless SteelMates® provide exceptional corrosion resistance combined with extremely fast drilling through steel and other metals up to 12.5mm thick
• Designed for fixing timber to steel substrates in a single operation
• Eliminates the need to drill a clearance hole through the timber being attached
• Made from genuine 300 Series, Non Magnetic, Stainless Steel, beware of magnetic imitations
• Fast drilling and easy to use
• High Shear Strength
• High Withdrawal Strength
• High Tensile Strength
• High Strip Torque
• Complies with AS3566.1 & 2
• Designed for fixing timber to steel substrates in a single operation
• Eliminates the need to drill a clearance hole through the timber being attached
• Made from genuine 300 Series, Non Magnetic, Stainless Steel, beware of magnetic imitations
• Fast drilling and easy to use
• High Shear Strength
• High Withdrawal Strength
• High Tensile Strength
• High Strip Torque
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, low pressure. Do not force the wings through the timber or they may snap prematurely. Once the drill point contacts the steel substrate instantly apply extra pressure to ensure the wings snap off when they contact the steel.
5/ Maintain pressure until the screw has fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, low pressure. Do not force the wings through the timber or they may snap prematurely. Once the drill point contacts the steel substrate instantly apply extra pressure to ensure the wings snap off when they contact the steel.
5/ Maintain pressure until the screw has fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
• These fasteners are ideal for timber flooring, decking, battens, stables etc.,
• General fastening of timber and composite boards or panels to heavy steel up to 12.5mm in highly corrosive environments.
• General fastening of timber and composite boards or panels to heavy steel up to 12.5mm in highly corrosive environments.
| Size | Pack Type | 480 Y Material | 500 Y Drilling Capacity in Steel | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|
| 12g-24 x 60mm |
|
|||||
| 12g-24 x 85mm |
|