120390 SteelMates® - Countersunk Undercut Head
These screws feature a specially designed 8 gauge Countersunk Undercut head on a 10 gauge screw. This provides a neat, flush finish when attaching hinges to metal frames with the added benefit of having a self drilling screw.
• Fast drilling and easy to use
• Flush finishing in thin materials
• Available in a selected range of SteelMates® and Self-Tapping screws, in Carbon steel Zinc Plated and Stainless Steel material sizes and several lengths.
• Complies with AS3566.1 & 2
• Flush finishing in thin materials
• Available in a selected range of SteelMates® and Self-Tapping screws, in Carbon steel Zinc Plated and Stainless Steel material sizes and several lengths.
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ If necessary push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ If necessary push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
• Designed for fixing hinges to steel/metal supports where the head height of a standard Countersunk headed screw is greater than the thickness of the hinge and would cause the head to sit proud of the surface of the hinge
• Ideal for fixing thin mate
• Ideal for fixing thin mate
| Size | Coating | Pack Type | 490 Y Description/Features | 500 Y Drilling Capacity in Steel | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|---|
| 10g-16 x 20mm #8Hd |
|