110300 RoofMates® Hex & 25mm Multi Seal
Designed for fixing into thin metal or timber battens in cyclone prone areas. These screws feature a Multi Seal Cyclone washer assembly and are suitable for fixing corrugated profiles, square rib profile colours, ridge cappings and flashings. Available painted to match all popular prepainted metal roofing, cladding & fencing profile colours. Matt and Metallic colours also available upon request.
• Longer length and thicker gauge for extra strength when fixing in thin metal or timber battens in higher wind classifications
• Fast drilling and easy to use
• Assembled with Multi-Seal for high strength, waterproof connections
• High Shear Strength
• High Withdrawal Strength
• High Tensile Strength
• High Strip Torque
• Available in a range of sizes and lengths
• High corrosion resistant coating
• Complies with AS3566.1 & 2
• Fast drilling and easy to use
• Assembled with Multi-Seal for high strength, waterproof connections
• High Shear Strength
• High Withdrawal Strength
• High Tensile Strength
• High Strip Torque
• Available in a range of sizes and lengths
• High corrosion resistant coating
• Complies with AS3566.1 & 2
1/ Ensure the correct driver tool is fitted to your power drill or screw driver.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
2/ Place the screw on the driver tool and position it onto the materials being fastened.
3/ Push sharply to create a centre mark and to prevent screw wander.
4/ Squeeze trigger and maintain steady, constant pressure until the screw has drilled and fastened.
Recommended Driving speed is approximately 2,000 r.p.m.
• For fixing corrugated and square rib roof profiles to timber battens, thin metal battens or steel purlins up to 2.0mm thick.
| Size | Coating | Pack Type | 500 Y Drilling Capacity in Steel | 520 Y Thread Length (TL) | 530 Y Driver Tool | Code |
|---|---|---|---|---|---|---|
| 15g-12 x 55mm |
|